Description
- 4.5” Diameter Rotor Shaft
- Multiple Drive Belts Assure Power to the Blades
- Under Deck Clump Busters
- Standard 3-Pt Category I Hitch Mount
- Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
- PTO Driveline Included Free of Charge
- Balanced Rotor and Shaft to Reduce Vibration & Reduce Bearing Wear
- Powder Coat Paint Finish
Specifications:
These machines require a tractor that has 2 rear remote hydraulic ports (4 hoses), or a single hydraulic port (2 hoses) if you get the optional float or non-float valve controller.
Spec | FL-AGL165 |
Working Width | 65” |
Overall Width | 71” |
Min. HP Req. | 30 HP+ |
Min Weight Tractor/ Loader | 4600 lbs |
Hitch | Cat I |
Gear Box Rating | 65 HP |
Pivot Offset | 61” Right |
Std Hammer Blades | 28 Hammer Blades |
Housing Thickness | 4mm |
Side Plate Thickness | 1/4” |
Rotor Dia. | 4” |
Rotor Shaft Dia. | 4 1/2” |
Blade Swing | 14” |
No. of Belts | 4 Belts |
3pt Conn. Width | 28” – 29” |
Driveline Type | 6-Spline W/Shear Bolt |
Weight | 895 lbs |
Crated Weight | 975 lbs |
Details:
Overall Width: The AGL 165 has a overall width of 71″.
Cutting Width: The AGL 165 has a tilling width of 65″.
Weight: The AGL 165 has a weight 895 lbs.
HP Requirements at PTO: The AGL 165 requires 30 – 65 PTO horsepower depending on the size of the unit.
Cutting Height: The AGL series has a 0″ – 6″ Adjustable to meet various height requirements
Housing Material Thickness: The AGL series has a housing of 3mm thick.
Side Plate Thickness: The AGL series has a side plate thickness of 1/4″.
Blade Type: The AGL series uses standard hammer blade. Each hammer blade weighs 14 oz made of cast steel (cast steel is much more durable than cast iron). Use the hammer blades for clearing saplings (2″ diameter or less).
Number of Blades: The AGL 165 uses 28 hammer blades.
Precision Blade Overlap: On the AGL series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.
Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.
Rotor Tube Diameter: 4 1/2″- Heavy duty steel tubing for long life.
Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.
Hitch Type: Category 1 standard 3-point.
Pivot Offset From Center Mount: This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO the mower extends 61″.
Hydraulic Offset: The hydraulic cylinder permits the carrier frame to be moved under your command. This permits you to control the cutting position of the mower. Designed so that you can get around rows, trees, fence line, or whatever else is in your path. This is connected to a Remote Hydraulic designed to power the cylinder (also known as 2-way valve) or the rear remote on your tractor design to power the cylinder. Hydraulic Requirements: Hydraulic source must be constant flow for powering Control Valve. We recommend use of Front Loader Style Control Valve with Float Option. Float spool connected to the vertical pivoting cylinder will allow mower to float and naturally follow the ground contour.
Drive Belts: The AGL series uses 4 belts.
Gearbox Rating: Up to 65 hp. Heavy duty proven oil bath gearbox for long life.
Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
Finish: Baked on powder coat, powder coat is superior to paint.
Support Before and After the Sale: At Betstco our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.
FLOAT AND NON-FLOAT CONTROLLER DESCRIPTION: The Float controller serves two functions. First, if your tractor has only one remote hydraulic port (2 hoses) you can use the float control as a splitter. 4 hoses from the machine plug into the controller and the controller is powered by the single port from your tractor. You can mount the control within reach of the tractor’s driver seat. The other function of this controller is you can plug the tilt cylinder into the float port and the mower will follow the contour of uneven ground.
Float controller can do the splitter function and float function.
The non-float controller can only be used for the splitter function.