Value-Leader VL-AM Boom Flail Mower
Working Width
23.6″ – 31.5″
Powered By:
Tractor PTO
18- 50 HP
Suitable for:
Brush up to 1″ thick
Playlist
Who is Value-Leader?
Value-Leader Implements was started in 1995 to provide a high quality high value option to compete with USA tractor dealership branded products. The focus has always been on providing the US consumer with long lasting dependable equipment. This is more value for our customers money.
This is done by always using high quality components and testing the components use in our implements. We also test the finished products for dependability, to make sure that they not only work but, that they last. We strive for our implement to be trouble free, when maintained, for not less than a 5 year period.
Value-Leader was the first USA implement company to offer a two year warranty on tractor implements.
The Value-Leader AM80 Boom mounted Flail mower is a tractor attachment for cutting difficult-to-reach areas. It is compatible with 3-point hitch Category I & II tractors and has a self-contained hydraulic circuit. It has a maximum PTO speed of 540 RPM and a hydraulic valve system controlled by flexible cables and mechanical levers. The mower has a sturdy framework for 3-point hitch and ground knives made of hardened steel. It also features wear-resistant bushings with lubrication and lift truck connections. The cutting head is 35 inches and can float.
Minimum Tractor Weight of 3,200 lbs Recommended. Always check stability with the boom at full reach and close to the ground before using without an additional counterbalance. When the boom is fully extended about 4 inches off the ground, push down on mower head. Tractor tire must not lift.
- Tractor 3-point Hitch Cat. I & II.
- Independent Self Contained Hydraulic Circuit with High-Efficiency Aluminum Gear Pump.
- Max. 540 RPM PTO.
- Hydraulic Valve System Operated by Flexible Cables & Control Unit with Mechanical Levers.
- High-Strength Framework Pre-Engineered for 3-Point Hitching to Cat. I & 2.
- Ground knives made of Hardened & Heat Treated Steel.
- Wear-Resistant Bushings with Lubricating Nipple.
- Lift Truck Connections.
- 35 Floating Cutting Head.
Spec | VL-AM80 |
Structure weight | 573 lbs / 260 kg |
Cutting Width | 31.5” / 800 mm |
Flail Type | Y Blade |
Number of flails | 32 |
Oil Capacity | 12.1 gal / 55 L |
Pto Speed | 540 r/min |
Tractor HP | 20 – 50 HP |
Extended on ground distance | 8.89’ |
Extended in air distance horizontal | 4.92’ |
Extended in air distance vertical | 8.20’ |
Submit your review | |
1 2 3 4 5 | |
Submit Cancel |
Need counter weigh build on mower