Farmer-Helper FH-FME Commercial Flail Mower
SKU: FH-FME155, FH-FME175, FH-FME195
78″ – 86″
35- 65 HP
Comes with 27 oz Blades
Brush up to 3″ thick
Who is Farmer-Helper?
Farmer Helper Machinery Co., Ltd (FHM) was established in 2009. The factory area is more than 20,000 square meters and houses 4 Metal laser cutting machines and more than 80 processing machines.
FHM manufactures a full range of high-quality implements for small to medium-sized tractor owners across the world. Farmer’s Helper has become an integral manufacturing premise for agricultural machines. Our team’s priority is customer success and satisfaction. We constantly improve our machines to meet customer demands and expectations.
Description for flail mower:
This light commercial flail mower is ideal for working the brush. Has stronger box channel 3-point frame and a deck with additional reinforcement to reduce twisting that occurs when mowing uneven ground. Comes with the optional EFGC Brush Hammer Blades installed. Flail Mowers are useful for jobs where you are cutting grass on the uneven ground, high grass, weeds, brush, and small saplings. A flail mower doesn’t throw grass, instead, it cuts finely and leaves the cuttings on the ground where it was cut making it an excellent choice for those places where you could cause damage by throwing debris. Highway mowing and park maintenance often use flail mowers because they are less likely to throw objects during cutting.
- Mower/Mulcher has 65 HP Cast-iron gearbox
- Four drive belts assure power to the blades
- Adjustable rear roller with mud scraper bar, heights of 0 to 6 inches
- “Y” grass blades are optional.
- Under deck clump busters
- Large deck offset lets you get close to objects.
- Rear height adjusting roller with tapered ends to eliminate gouging when turning
Overall Width: The FME series has an overall width of 67″ to 83″ depending on the size of the unit.
Cutting Width: The FME series has a tilling width of 60″ to 78″ depending on the size of the unit.
Weight: The FME series has a weight of 720 lbs to 865 lbs depending on the size of the unit.
HP Requirements at PTO: The FME series requires 25 – 65 PTO horsepower depending on the size of the unit.
Cutting Height: The FME series has a 0″ – 6″ Adjustable to meet various height requirements
Housing Material Thickness: The FME series has a housing of 4mm unit.
Side Plate Thickness: The FME series has a side plate thickness of 1/4″ to 5/16″, depending on the size of the unit.
Blade Type: The FME series uses standard hammer blade or reversible Y-blades. Each hammer blade weighs 1 lb. 11 oz made of cast steel (cast steel is much more durable than cast iron). The Y-blades weighs 10.9 oz. Use the hammer blades for clearing saplings (3″ diameter or less), and the Y-blades for grasses.
Number of Blades: The FME series uses 24 – 32 hammer blades or 48 – 64 Y-blades, depending on the size of the unit.
Precision Blade Overlap: On the FME series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.
Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.
Rotor Tube Diameter: 4 1/2″ – Heavy-duty steel tubing for long life.
Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.
Rotor Swing Diameter: 14 1/2″ Large swing so that the blades build required inertia.
Hitch Type: Category 1 or 2, standard 3-point, depending on the size of the unit.
Offset From Center Mount: This feature allows for an offset from the center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways, etc. From the center of the PTO, the mower extends 16″.
Drive Belts: The FME series uses 3-4 belts depending on the size of the unit.
Gearbox Rating: The FME series is rated 65 hp. Heavy-duty proved oil bath gearbox for long life.
Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
Finish: Baked-on powder coat, powder coat is superior to paint.
Warranty: 2-year parts warranty with an optional 2-year extension.
Support Before and After the Sale: At Betstco our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble-free machine from the get-go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.
|Min. HP Req.||30 HP||30 HP||35 HP|
|Hitch||Cat. I||Cat. I||Cat I or II|
|Gear Box Rating||65 HP||65 HP||65 HP|
|Std Hammer Blades||24 Hammer Blades||28 Hammer Blades||32 Hammer Blades|
|Optl “Y”/Rock Blades||48 “Y/Rock Blades”||56||64 “Y”/Rock Blades|
|Side Plate Thickness||1/4″||1/4″||5/16”|
|Rotor Shaft Dia.||4 1/2”||4 1/2”||4 1/2”|
|No. of Belts||3 Belts||4 Belts||4 Belts|
|3pt Conn. Width||Series 5 Quick Connect Shear Bolt, 6-Spline||Series 5 Quick Connect Shear Bolt, 6-Spline||27 1/2 – 40”|
|Driveline Type||Series 5 Quick Connect Shear Bolt, 6-Spline||Series 5 Quick Connect Shear Bolt, 6-Spline||Series 5 Quick Connect Shear bolt, 6-Spline|
|Weight||720 lbs||740 lbs||865 lbs|
|Crated Weight||755 lbs||790 lbs||890 lbs|
Submit your review