48″ Standard Ditch Bank Flail Mower, FH-AGL125

$2,956.00

Only 2 left in stock

SKU: FH-AGL125 Category: Tags: ,

Lift Gate Needed

What is a lift gate?:

A lift gate is for truck deliveries for those without a forklift or front end loader to remove the unit from the truck.

Extended Warranty

Extra set of Hammer Blades

Extra set of belts (Recommended for first time flail mower users)

Description

Verger flail mulchers are Super Heavy Duty Mowers designed with heavy cutting blades that can chop heavy brush including grasses, debris, sticks, vines, branches, and other wooded materials up to 2” in diameter. The mower head is attached to a hydraulic arm allowing you to swing the mulcher beyond your tractors wheels. The head may be pivoted hydraulically up to 90 degrees for hedge or hillside work or down 60 degrees for ditch or bank work. Connect it to our optional 4-way hydraulic control valve with a hydraulic float and the mulcher will follow the contours of the terrain.A flail mower doesn’t throw grass, instead it cuts finely and leaves the cuttings on the ground where it was cut making it an excellent choice for those places where you could cause damage by throwing debris. Highway mowing and park maintenance often use flail mowers because they are less likely to throw objects during cutting.
Key Features:

  • 4.5” Diameter Rotor Shaft
  • Multiple Drive Belts Assure Power to the Blades
  • Under Deck Clump Busters
  • Standard 3-Pt Category I Hitch Mount
  • Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
  • PTO Driveline Included Free of Charge
  • Balanced Rotor and Shaft to Reduce Vibration & Reduce Bearing Wear
  • Powder Coat Paint Finish

Specifications:

SpecFL-AGL125
Working Width48”
Overall Width54”
Min. HP Req.20 HP+
Min Weight Tractor/ Loader3400 lbs
HitchCat I
Gear Box Rating65 HP
Pivot Offset44” Right
Std Hammer Blades20 Hammer Blades
Housing Thickness3mm
Side Plate Thickness1/4”
Rotor Dia.4”
Rotor Shaft Dia.4 1/2”
Blade Swing14”
No. of Belts3 Belts
3pt Conn. Width28” – 29”
Driveline Type6-Spline W/Shear Bolt
Weight675 lbs
Crated Weight699 lbs

Details:

Overall Width: The AGL 125 has a overall width of 54″.

Cutting Width: The AGL 125 has a tilling width of 48″.

Weight: The AGL 125 has a weight 675 lbs.

HP Requirements at PTO: The AGL 125 requires 20 – 65 PTO horsepower depending on the size of the unit.

Cutting Height: The AGL series has a 0″ – 6″ Adjustable to meet various height requirements

Housing Material Thickness: The AGL series has a housing of 3mm thick.

Side Plate Thickness: The AGL series has a side plate thickness of 1/4″.

Blade Type: The AGL series uses standard hammer blade. Each hammer blade weighs 14 oz made of cast steel (cast steel is much more durable than cast iron). Use the hammer blades for clearing saplings (2″ diameter or less).

Number of Blades: The AGL 125 uses 20 hammer blades.

Precision Blade Overlap: On the AGL series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.

Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.

Rotor Tube Diameter: 4 1/2″- Heavy duty steel tubing for long life.

Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.

Hitch Type: Category 1 standard 3-point.

Pivot Offset From Center Mount: This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO the mower extends 44″.

Hydraulic Offset: The hydraulic cylinder permits the carrier frame to be moved under your command. This permits you to control the cutting position of the mower. Designed so that you can get around rows, trees, fence line, or whatever else is in your path. This is connected to a Remote Hydraulic designed to power the cylinder (also known as 2-way valve) or the rear remote on your tractor design to power the cylinder. Hydraulic Requirements: Hydraulic source must be constant flow for powering Control Valve. We recommend use of Front Loader Style Control Valve with Float Option. Float spool connected to the vertical pivoting cylinder will allow mower to float and naturally follow the ground contour.

Drive Belts: The AGL series uses 3 belts.

Gearbox Rating: Up to 65 hp. Heavy duty proven oil bath gearbox for long life.

Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO

Finish: Baked on powder coat, powder coat is superior to paint.

Warranty: 2 year parts warranty with an optional 2 year extension.

Support Before and After the Sale: At Betstco  our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.

Additional information

Working Width

48" Excellent for mowing around fences, buildings & walkways

Overall Width

54" Excellent for mowing around fences, buildings & walkways

Min. HP Req

20+ HP Fits a large number of consumer, municipality & landscape tractors

Hitch

Cat I Allowing you to utilize your Cat I toplink & lift Arm 5/8" connection

PTO Speed

540 RPM 540 RPM is standard Cat I PTO Speed

Minimum Weight Tractor & Loader

3400 lbs Recommended for 2 reasons. 1) Structural, making sure that your tractor will support the stress put on the Cat II 3-pt Hitch when the mower is not directly behind the hitch connections. 2) Counter Balance, making sure that you maintain balance when you have your Flail Mower extended to its furthest reach

Gearbox Rating

65 HP Allows Cat-I tractors up to 50 HP to use this Mower

Heavy Duty Gearbox

Standard Strong Cast Iron gearbox with steel gears will provide years of reliable service built in overrunning feature prevents mower from pushing tractor when power is disengaged

Pivot Offest

44" Right Pivoting head has a full length roller to follow the ground contours & can be operated from below horizontal for banks & ditches, to vertical to trim hedges and small trees

Hydraulic Offset

Swings out 44", up 90 degrees, down 60 degrees or float The hydraulic cylinder permits the carrier frame to be moved under your command. This permits you to control the cutting position of the mower. Designed so that you can get around rows, trees, fence line, or whatever else is in your path. This is connected to a Remote Hydraulic designed to power the cylinder (also known as 2-way valve) or the rear remote on your tractor design to power the cylinder.

Hydraulic Requirements

Hydraulic source must be constant flow for powering Control Valve. WE RECOMMEND use of Front Loader Style Control Valve with Float option. Float spool connected to the vertical pivoting cylinder will allow mower to float and naturally follow te ground contour.

Grass "Y" Blades

40 Blades Reversible "Y" Blades with precise blade overlap is important to achieve an even cut result

OPTIONAL Hammer Blades

20 Hammers Allows you to cut & mulch wooded material up to 2"

Cutting Capacity

2" Diameter With Hammer blades

Cutting Height

1/4 – 6 Variable heights allow you to set correct height for your application

Housing Thickness

1/4" Resist; denting & wear

Side Plate Thickness

1/4" Provides structural support

Reinforced Lift Point

Standard Allowing you to raise & move Mower without implement being attached to your tractor

Roller Diameter

4" Utilized to adjust cutting height, greaseable bearings and rounded at the edges to prevent gouging during turns with mud scraper for positive height control

Rotor Shaft Diameter

4 1/2 Large diameter protects against being bent by obstructions

Reverse Rotor Rotation

Standard Shaft rotation is forward. The knives cut forward and up, picking up the bent over grass, pulling in the tall grass & weeds, cutting & shredding the material & discharging it to the rear

Blade Swing

14" Large swing so that the blades build the required force needed for cutting

Balanced Rotor & Shaft

Standard Increases the bearing life, minimizes vibrations, audible noise, power losses and finally it results in increased quality of product

Front Flappers

Standard To prevent material from being thrown out from under the deck

Side Skids

Standard Replaceable; protects sides of the mower

Closed Rear Panel

Standard Prevents rocks & other material from being thrown from mower under force & provides greater mulching of mowed material

No. of Belts

3 Multiple belts ensure a positive transfer of power to your flail mowers blades. Provides safety slip clutch point

External Belt Adjustment

Standard Easy access to loosen or tighten a few bolts to apply tension, loosen to change the belts

3-Pt Cat I Connection Width

26" Allows for easy connection to a wide range to Cat-I hitch tractors

Driveline Type

6-Spline w/ Shear Bolt The shear bolt protects the mower from damage if the rotor becomes plugged. It is important to used the correct replacement bolt of proper size & strength to ensure that the shear device will function properly.

Bearings

Easy Access/Greaseable Great for ease of maintenance and availability should you need to replace the bearings

Gearbox Lubracation/Capacity

1 Quart SAE 80W – 90 Gear Oil

Warranty

2 Year Parts available through Betst Products Parts Department

Weight

675 lbs

Crated Weight

699 lbs

Manual

Manual

Usage Videos

Explaining the flail mower