2-Way Hydraulic Stump Grinder, FH-SG24-PRO
30 – 50 HP
Select PTO Stump Grinder Below to Purchase
Description of PTO Stump Grinder:
For rural property owners and those with wooded lots, the stump grinder is great and incredibly useful for getting rid of those ugly stumps, quickly and easily.
- 24” inch two-way cutting wheel
- Replaceable carbide teeth
- Cat-I or II 3-point
- Cutting tip speed 5,966 RPM
|Recommnded HP||30 HP – 50 HP|
|Number of Teeth||54 Dual Direction|
|Tooth Construction||Carbide Steel Bolt-in|
|Required PTO Speed||540 RPM|
|Cutting Wheel Speed||950 RPM|
|Cutting Height||18” above ground|
|Cutting Depth||8” below ground|
|Maximum Cutting Depth (Per Pass)||6”|
|Maximum Horizontal Cut||26”|
|Hitch Category||Cat. I or II|
|Shipping Weight||280 kg / 617 lbs|
Submit your review
I purchased the SG-24 Pro Hydraulic Stump Grinder and so far it’s been all good as for grinding stumps. This is a heavy duty unit and seems to be very well built. I run it behind a Ford 4000 diesel 55hp and it’s a stump eating monster. I ground a 24” southern pine below ground in about 30 minutes.
There were some issues when I received the grinder and it wasn’t secured in the crate very well.
I was missing 2 hoses and one was damaged from shipping so I called Betsco and they immediately shipped the hoses and they arrived in a week.
I checked everything over good before using the grinder and I’m glad I did for the grinding wheel was loose on the gearbox so I removed the cotter pin and tighten the nut.
As for performance I give it a an A+ . As for longevity, that’s to be determined.