PowR’Kraft PK-GTS1500E 4” Towable Wood Chipper
Feed is:
Gravity Pinch/Pull
Powered By:
Gasoline
Playlist
Description for a Towable Wood Chipper:
The PowR’Kraft GTS1500E is a towable wood chipper that is powered by a 15HP (420cc) electric start gasoline engine. It does not require a tractor and is self-contained for easy operation. The chipper has a chipping capacity of up to 4 inches in diameter and features a 12-inch wide roller and 2 large knives for effective and reliable cutting. The unit is equipped with an adjustable trailer hitch and support leg for easy movement and also has a handle for manual mobility. The 12-inch wheels and ideal-positioned handle make it comfortable to move the shredder around on the property.
Key Features:
- The adjustable trailer hitch and the support leg allow for easy movement of the chipper with your garden tractor, SUV or ATV or remove the trailer hitch with a simple pin and it is perfectly balanced, enabling you to move it around by hand with the handle.
- The large 12” wheels and the ideal positioned handle to allow you to comfortably move the shredder around on your property.
- The chipping drum mechanism is designed with a roller of 12” in width and 2 large knives. These knives pull the wood powerfully into the shredder and cut the material reliably against the counter knife.
Specifications:
Model | PK-GTS1500E |
Tire diameter | 12” |
Number of knives | 2 + 1 |
Knife rotor speed | 2,400 RPM, max |
Inside end of feeder funnel | 12” x 6” |
Feeder funnel opening | 18.5” x 13.4” |
Height of feeder funnel | 43.3” |
Max. wood diameter | 4” |
Height of discharge funnel | 55” |
Housing material thickness | 4mm (5/32”) |
Painting powder coated | Yellow & Black |
Engine | 4 stroke, 420cc, 15HP 12 volt battery electric start |
Engine oil | 1 quart (10W30 / 10W40) |
Gas tank cap. | 1.65 US Gal. max |
Fuel consumption | .85 US gal./hr (max load) |
Max. RPM | 3,600 RPM |
Knife rotor drive | Dual belt drive |
Weight | 454 lbs. |
Motor Maker: | Jiangdong |
Submit your review | |
1 2 3 4 5 | |
Submit Cancel |
The woodchipper is awesome so far after some minor modifications. Please note that the ends of the two bolts on top of the belt cover near the engine are protruding directly on top of the belts. This may shorten the life of the belts. I replaced those two bolts with stick-on Velcro. I also modified the top of the belt cover to give access for greasing the bearing without having to take off the belt cover. Lastly, I think it will be super helpful if there is an owner's manual on how to put the wood chipper together. Thanks Betstco for an affordable professional woodchipper!