FH-BRM Boom Sickle Hedge Cutter
SKU: FH-BRM120, FH-BRM150, FH-BRM180
36″ – 51″
8 GPM+ Hydraulic Flow
Brush up to 1″ thick
Select Unit Below to Purchase
Got ditches to mow, hedges to trim? Is brush overgrowing your driveway? A shrub that needs to be controlled? Our sickle hedge cutter is a perfect solution for maintaining hedges, ditches, and shrubs alongside roadways and fields.
Tractor with a minimum weight of 2000 lbs is required.
- Will cut a flat top hedge that is 11 feet tall.
- Will cut a vertical side and up to 6 feet out.
- Ditches and banks down to 45° angle.
- Finger bar sickle hedge cutter connects to your tractors remote hydraulics to make quick easy work of those problem areas that a normal mower cannot reach.
|Required Hydraulic Pressure||2250 TO 3500 PSI||2250 TO 3500 PSI||2250 TO 3500 PSI|
|Required Hydraulic Flow||8 GPM to 11 GPM||8 GPM to 11 GPM||8 GPM to 11 GPM|
|Unit Net Weight||529 lbs||552 lbs||573 lbs|
|Gross Shipping Weight||564 lbs||587 lbs||608 lbs|
|Mower Head Only Weight||82 lbs||88 lbs||93 lbs|
|Brush Cutting Diameter||1 inch||1 inch||1 inch|
|Maximum Up Reach||136 inches+||136 inches+||136 inches+|
|Side Reach at Maximum Up||36 inches+||36 inches+||36 inches+|
|Reach at Ground||51 inches+||51 inches+||51 inches+|
|Addition of Cutting Bar Reach||47 inches||59 inches||70 inches|
|Down Angle (Slope)||45 degrees||45 degrees||45 degrees|
|Travel Position||49 inches left, 51 inches right||49 inches left, 51 inches right||49 inches left, 51 inches right|
Submit your review