Farmer-Helper FH-EFG Medium Duty Flail MOWER
Comes with 14 oz Blades
Suitable for:
Brush up to 2″ thick
Working Width
41″ – 68″
Powered By:
Tractor PTO
18- 45 HP
Playlist
3:29
17:01
2:04
-
-25%41″ Medium Duty Flail Mower, FH-EFG105
Sale 25%Original price was: $2,251.00.$1,688.00Current price is: $1,688.00.23 in stock
Add to cart -
-25%48″ Medium Duty Flail Mower, FH-EFG125
Sale 25%Original price was: $2,401.00.$1,800.00Current price is: $1,800.00.47 in stock
Add to cart -
-25%53″ Medium Duty Flail Mower, FH-EFG135
Sale 25%Original price was: $2,463.00.$1,847.00Current price is: $1,847.00.47 in stock
Add to cart -
-25%60″ Medium Duty Flail Mower, FH-EFG155
Sale 25%Original price was: $2,530.00.$1,897.00Current price is: $1,897.00.4 in stock
Add to cart -
-25%68″ Medium Duty Flail Mower, FH-EFG175
Sale 25%Original price was: $2,804.00.$2,103.00Current price is: $2,103.00.36 in stock
Add to cart
Who is Farmer-Helper?
Farmer Helper Machinery Co., Ltd (FHM) was established in 2009. The factory area is more than 20,000 square meters and houses 4 Metal laser cutting machines and more than 80 processing machines.
FHM manufactures a full range of high-quality implements for small to medium-sized tractor owners across the world. Farmer’s Helper has become an integral manufacturing premise for agricultural machines. Our team’s priority is customer success and satisfaction. We constantly improve our machines to meet customer demands and expectations.
Key Features:
The EFG series comes with cast steel hammer blades. These blades are 14 oz and capable of cutting through 2” thick brush/saplings. The rotor has precise overlapping blades to ensure a thorough cut.
These machines have multiple drive belts to ensure a smooth transfer of power from the gearbox to the blade shaft to maintain speed and eliminate damaging vibration.
This machine is rated for Category 1 tractor’s 3-point hitch.
The PTO shaft is included with purchase of machine. These machines come with an 80cm (31.5 inch) PTO shaft fully collapsed. Shear bolt size depends on mower size. EFG105 up to EFG135 comes with a Series 04 PTO shaft, shear bolt is 5/16 bolt, 2.5 inches long, Grade 5. EFG155 and larger comes with a Series 05 PTO shaft, shear bolt is 3/8 bolt, 2.5 inches long, Grade 5.
2 mounting holes on the housing, 6 mounting positions on the roller bracket and 4 positions on the side skids allow for height and angle adjustment of the mower.
These precision balanced rotors will spin at high speeds without causing a damaging vibration that causes unnecessary wear on the bearings and seals.
Powder coating provides a durable, long-lasting finish that protects against rust, corrosion, and wear. This high-quality coating enhances the mower’s resistance to harsh weather, moisture, and debris, ensuring longevity even in demanding agricultural and landscaping environments. Additionally, the smooth, tough surface reduces maintenance needs and helps maintain the mower’s professional appearance over time.
Each flail has two positions for mounting the gearbox. You can set your machine to be slightly more or less offset. Offset distance determined by size of mower.
A 2300 RPM rotor provides a balance between cutting efficiency and durability. At this speed, the rotor generates high centrifugal force, ensuring the flail blades cut through grass, weeds, and light brush cleanly and effectively. The consistent rotation speed also reduces vibration and wear on the mower, leading to smoother operation and extended equipment lifespan. Additionally, a 2300 RPM rotor helps maintain efficiency without excessive power consumption, making it suitable for various mowing applications, from pastures to roadside maintenance.
Take your grounds maintenance to the next level with the Farmer-Helper EFG Series (Medium Duty) Flail Mower – the solution to all changing lawn care needs! Be the expert in grass and brush upkeep of your orchard, nursery, vineyard, greenhouse, or garden with this heavy-duty, multi-tool mower. Its impressive blade tip speed and convenient, replaceable blades allow you to tackle any lawn care challenge with versatility.
Revolutionize your lawn maintenance routine with the convenience of switching between grass mulching blades for a neat, manicured appearance around your home or hammer blades for denser areas, capable of cutting and mulching wooded material up to 2 inches in diameter. The Farmer-Helper EFG Series is an essential tool for those dedicated to lawn maintenance, designed specifically for acreages of 15 or less.
Adieu to dirty cuts and airborne debris in use. The advanced flail mower technology provides precise cutting, leading to top-notch chopped grass clippings and lower damage risk. A favorite among professionals and weekend warriors, the mower is designed for maintaining parks and highway mowing at its optimum. Don’t delay – buy the Farmer-Helper EFG Series Flail Mower now and experience a real makeover in your lawnmowing routine!
Details:
Overall Width: The Farmer-Helper EFG series has an overall width of 47″ to 75″ depending on the size of the unit.
Cutting Width: The Farmer-Helper EFG series has a cutting width of 41″ to 68″ depending on the size of the unit.
Weight: The Farmer-Helper EFG series has a weight of 451 lbs to 644 lbs depending on the size of the unit.
HP Requirements at PTO: The Farmer-Helper EFG series requires 18 – 45 PTO horsepower depending on the size of the unit.
Cutting Height: The Farmer-Helper EFG series has a 0″ – 6″ Adjustable to meet various height requirements
Housing Material Thickness: The Farmer-Helper EFG series has a housing of 3mm.
Side Plate Thickness: The Farmer-Helper EFG series has a side plate thickness of 1/4″.
Blade Type: The EFG series comes standard with cast steel hammer blades. Each blade weighs 14 oz and does not need to be sharpened, as hammer blades bludgeon material to pulverize it into fine clippings. Hammer blades are rated for cutting tall grass and saplings 2” in diameter or less. We also carry optional forged steel hammer blades. If you do not have rocks or debris in your pasture, you can order a spare set of cast steel blades, they are rated for the same material (tall grass and saplings up to 2” diameter) but are less expensive than a set of forged hammers. We also carry grass knives that are only good for tall grass, but it leaves a nicer looking cut. Grass knives are made of tool steel and will deflect rocks without breaking.
Number of Blades: The Farmer-Helper EFG series uses 16 – 28 hammer blades, depending on the size of the unit.
Precision Blade Overlap: On the Farmer-Helper EFG series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.
Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.
Rotor Tube Diameter: 4 1/2″- Heavy duty steel tubing for long life.
Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.
Rotor Swing Diameter: 13″ Large swing so that the blades build required inertia.
Hitch Type: Category 1 standard 3-point.
Offset From Center Mount: This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO, the mower extends 19 3/4″ to 43 1/2″ depending on the size of the unit.
Drive Belts: The Farmer-Helper EFG series uses 2 – 4 belts, depending on the size of the unit.
Gearbox Rating: Up to 45 hp. Heavy duty proved oil bath gearbox for long life.
Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
Finish: Baked on powder coat, powder coat is superior to paint.
Support Before and After the Sale: At Betstco our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get-go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.
Cast steel flail mower hammers are made by pouring molten steel into a mold, where it cools and solidifies into the desired shape. Forged steel flail mower hammers are made by heating a piece of steel and then shaping it using a hammer or press.
Forged steel is stronger and more durable than cast steel. This is because the forging process aligns the grain structure of the steel, making it more resistant to breaking and bending. Additionally, forged steel tends to be more precise in shape and size, which can make it a better fit for certain types of machinery. On the other hand, cast steel is less expensive and it’s more easily manufactured. Forged steel flail mower hammers are stronger and more durable than cast steel flail mower hammers, but they are also more expensive.
| Spec | FH-EFG105 |
| Working Width | 41” |
| Overall Width | 47” |
| Min. HP Req. | 18 HP |
| Hitch | Cat I |
| Gear Box Rating | 45 HP |
| Distance Right of Center Mount | 19.75 inches or 23.75 inches |
| Std Hammer Blades | 16 Hammer Blades |
| Housing Thickness | 3mm |
| Side Plate Thickness | 1/4” / 7mm |
| Rotor Dia. | 4” |
| Rotor Shaft Dia. | 4 1/2” |
| Blade Swing | 13” |
| No. of Belts | 2 |
| Driveline Type | Series 4 Quick Connect, Shear Bolt Std. 6-Spline |
| Weight | 451 lbs |
| Crated Weight | 486 lbs |
| Spec | FH-EFG125 |
| Working Width | 48” |
| Overall Width | 54” |
| Min. HP Req. | 20 HP |
| Hitch | Cat I |
| Gear Box Rating | 45 HP |
| Distance Right of Center Mount | 24 inches or 28.25 inches |
| Std Hammer Blades | 20 Hammer Blades |
| Housing Thickness | 3mm |
| Side Plate Thickness | 1/4” / 7mm |
| Rotor Dia. | 4” |
| Rotor Shaft Dia. | 4 1/2” |
| Blade Swing | 13” |
| No. of Belts | 2 |
| Driveline Type | Series 4 Quick Connect, Shear Bolt Std. 6-Spline |
| Weight | 487 lbs |
| Crated Weight | 535 lbs |
| Spec | FH-EFG135 |
| Working Width | 53” |
| Overall Width | 60” |
| Min. HP Req. | 22 HP |
| Hitch | Cat I |
| Gear Box Rating | 45 HP |
| Distance Right of Center Mount | 28.50 inches or 32.25 inches |
| Std Hammer Blades | 20 Hammer Blades |
| Housing Thickness | 3mm |
| Side Plate Thickness | 1/4” / 7mm |
| Rotor Dia. | 4” |
| Rotor Shaft Dia. | 4 1/2” |
| Blade Swing | 13” |
| No. of Belts | 2 |
| Driveline Type | Series 4 Quick Connect, Shear Bolt Std. 6-Spline |
| Weight | 521 lbs |
| Crated Weight | 569 lbs |
| Spec | FH-EFG155 |
| Working Width | 60” |
| Overall Width | 67” |
| Min. HP Req. | 24 HP |
| Hitch | Cat I |
| Gear Box Rating | 45 HP |
| Distance Right of Center Mount | 31.25 inches or 35.50 inches |
| Std Hammer Blades | 24 Hammer Blades |
| Housing Thickness | 3mm |
| Side Plate Thickness | 1/4” / 7mm |
| Rotor Dia. | 4” |
| Rotor Shaft Dia. | 4 1/2” |
| Blade Swing | 13” |
| No. of Belts | 3 |
| Driveline Type | Series 4 Quick Connect, Shear Bolt Std. 6-Spline |
| Weight | 610 lbs |
| Crated Weight | 658 lbs |
| Spec | FH-EFG175 |
| Working Width | 68” |
| Overall Width | 75” |
| Min. HP Req. | 28 HP |
| Hitch | Cat I |
| Gear Box Rating | 45 HP |
| Distance Right of Center Mount | 39.25 inches or 43.5 inches |
| Std Hammer Blades | 28 Hammer Blades |
| Housing Thickness | 3mm |
| Side Plate Thickness | 1/4” / 7mm |
| Rotor Dia. | 4” |
| Rotor Shaft Dia. | 4 1/2” |
| Blade Swing | 13” |
| No. of Belts | 4 |
| Driveline Type | Series 4 Quick Connect, Shear Bolt Std. 6-Spline |
| Weight | 644 lbs |
| Crated Weight | 698 lbs |
Submit your review | |
Purchased EFG125 48” to use behind my Deere 1025R. Received the unit in good time considering the state of the world lately. Paid for the lift gate service and it was well worth it. FED EX driver wheeled it right into the garage. The unit comes well packaged.
I am impressed with the build quality considering the price. Have only had the time to use it once so far, the 1025R handles it quite well. This thing turns the power of the Deere into sheer destruction. It handled everything I threw at it, and.my tractor rated at 18 pto horsepower never seemed to struggle.The only issue I ran into is the pin worked loose from the kick stand and the mower ended up beating it up pretty good. So after one use I would recommend this unit.looking forward to getting more use out of it and eventually changing over to grass blades.
So far it looks like a good flail mower. Only wish it was designed for a quick hitch. I will have to modify for my needs.
I have a half acre of green irrigated lawn to mow and abut 3 acres of rough dry land to maintain. After researching whether a flail mower would do a good job trimming a groomed lawn I purchased the FH-EFG155 flail mower for my Massey Ferguson GC 1715 tractor. the price was less than half that of a mid mount mower. The package arrived exactly on time. The packaging was amazing. The setup was typical of a 3 point implement. Attaching the stand was a pain. It requires removal of half the front skirt guards. I also drilled another hole to offset it from center. If installed in the center, and stored there, the stand will impact the drive line. Mine came with the mulching hammer blades. I sharpened them and it does a better job of grooming my irrigated lawn than any riding mower I have used. This a very robust unit and does a great job on the dry acreage. I have cut tall dead dead grass and even a 3 ft tall tree. It took two passes but produced a fairly clean result. The only down side would be that it is not as nimble as a mid mount mower.
