15% off Implements until 12/02/24!

Experience the power and versatility of the Value-Leader AGFN, a heavy-duty verge flail mulcher designed specifically for Cat-II tractors. Equipped with formidable 43-ounce cutting blades, this mower is capable of chopping through heavy brush, grasses, debris, sticks, vines, branches, and other materials up to 4 inches in diameter. The mower head, attached to a hydraulic arm, can be pivoted up to 90 degrees for hedge or hillside work, or down 55 degrees for ditch or bank work.

The AGFN also boasts a floating right side 3-point connection, an openable rear deck for faster mowing, and a holder for hoses. Enhance its adaptability by connecting it to an optional 4-way hydraulic control valve with a hydraulic float, allowing the mower to effortlessly follow the terrain’s contours.

Invest in the Value-Leader AGFN verge flail mulcher and enjoy the benefits of a powerful, flexible, and efficient solution for your landscaping and groundskeeping projects.

FLOAT AND NON-FLOAT CONTROLLER DESCRIPTION: The Float controller serves two functions. First, if your tractor has only one remote hydraulic port (2 hoses) you can use the float control as a splitter. 4 hoses from the machine plug into the controller and the controller is powered by the single port from your tractor. You can mount the control within reach of the tractor’s driver seat. The other function of this controller is you can plug the tilt cylinder into the float port and the mower will follow the contour of uneven ground.

Float controller can do the splitter function and float function.

The non-float controller can only be used for the splitter function.

• Horizontal Extension: 7 feet 8.4 inches
• Vertical Extension: 5 feet 10 inches
• 4” Cutting Capacity
• Reverse Rotor Rotation: Standard
• Balanced Rotor & Shaft: Standard
• Front Flappers: Standard
• Side Skids: Standard
• External Belt Adjustment: Standard
• Adjustable Rear Deck

Overall Width of Ditch Bank Flail Mowers: The Value-Leader VL-AGF series has an overall width of 72.5″ to 100″ depending on the size of the unit.

Cutting Width of Ditch Bank Flail Mowers: The Value-Leader VL-AGF series has a tilling width of 55″ to 78″ depending on the size of the unit.

Weight: The Value-Leader VL-AGF series has a weight of 1590 lbs to 1820 lbs depending on the size of the unit.

HP Requirements at PTO: The Value-Leader VL-AGF series requires 45 – 85 PTO horsepower depending on the size of the unit.

Cutting Height: The Value-Leader VL-AGF series has a 1/4″ – 6″ Adjustable to meet various height requirements

Housing Material Thickness: The Value-Leader VL-AGF series has a housing of 5/16″ thick.

Side Plate Thickness: The Value-Leader VL-AGF series has a side plate thickness of 5/16″.

Blade Type: The Value-Leader VL-AGF series uses a heavy-duty hammer blade. Each hammer blade weighs 2lbs 12 oz made of cast steel (cast steel is much more durable than cast iron). Use the hammer blades for clearing saplings (4″ diameter or less) and for grasses.

Number of Blades: The Value-Leader VL-AGF series uses 12 – 20 hammer blades, depending on the size of the unit.

Precision Blade Overlap: On the Value-Leader VL-AGF series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.

Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.

Rotor Tube Diameter: 5″ – Heavy-duty steel tubing for long life.

Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.

Hitch Type: Category 2 standard 3-point.

Drive Belts: The Value-Leader VL-AGF series uses 4 belts.

Gearbox Rating: Up to 85 hp. Heavy-duty proved oil bath gearbox for long life.

Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO

Finish: Baked-on powder coat, powder coat is superior to paint.

Support Before and After the Sale: At Betstco our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble-free machine from the get-go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.