55″ Gold Ditch Bank Flail Mower, VL-AGFN140


Only 2 left in stock

SKU: VL-AGFN140 Category: Tag:

Lift Gate Needed

Extended Warranty

Float Control


This is a premium product that offers higher quality parts and specifications. This product is designed with performance in mind.

AGFN takes our AGF mower and adds an openable rear deck for faster mowing when you do not need fine mulching (it is also nice for changing blades) a holder for your hoses when not attached and a floating right side 3-point connection to allow the mower greater flex when following the contours of the ground. AGFN verge flail muchers are super heavy duty mowers designed for Cat-II tractors. They feature very heavy 43 ounce cutting blades that can chop heavy brush including grasses, debris, sticks, vines, branches and other wooded materials up to 4” in Diameter. The mower head is attached to a hydraulic arm allowing you to swing the mulcher beyond your tractors wheels. The head may be pivoted hydraulically up 90 degrees for hedge or hill side work or down 55 degrees for ditch or bank work. Connect it to our optional 4-way hydraulic control valve with a hydraulic float and the mulcher will follow the contours of the terrain.

Key Features:

  • Horizontal Extension: 7 feet 8.4 inches
  • Vertical Extension: 5 feet 10 inches
  • 4” Cutting Capacity
  • Reverse Rotor Rotation: Standard
  • Balanced Rotor & Shaft: Standard
  • Front Flappers: Standard
  • Side Skids: Standard
  • External Belt Adjustment: Standard
  • Adjustable Rear Deck



Working Width55”
Total Width72 1/2”
Required HP45-85 HP
HitchCat II
Min Weight of Tractor & Loader5,000 lbs
Gear Box Rating85 HP
Pivot OffsetUp 90°, Down 55°
Hydraulic OffsetVertical Pivot 145°, Angle Up 90 ° Angle Down 55 ° or float
Std Hammer Blades12 Hammer Blades
Cutting Height1/4” – 6”
Housing Thickness5/16”
Side Plate Thickness5/16”
Rotor Dia.5 7/8”
Rotor Shaft Dia.5”
Blade Swing15” diameter
No. of Belts4 Belts
3pt Cat-II Conn. Width30 1/2” – 41 1/2”
Driveline TypeSeries 5 Quick Connect Shear Bolt Std. 6-Spline
Weight1590 lbs
Crated Weight1660 lbs


Overall Width: The VL-AGF N140 has a overall width of 72.5″.

Cutting Width: The VL-AGF N140 has a tilling width of 55″.

Weight: The VL-AGF N140 has a weight 1590 lbs.

HP Requirements at PTO: The VL-AGF N140 requires 45 – 85 PTO horsepower.

Cutting Height: The VL-AGF series has a 1/4″ – 6″ Adjustable to meet various height requirements

Housing Material Thickness: The VL-AGF series has a housing of 5/16″ thick.

Side Plate Thickness: The VL-AGF series has a side plate thickness of 5/16″.

Blade Type: The VL-AGF series uses heavy duty hammer blade. Each hammer blade weighs 2lbs 12 oz made of cast steel (cast steel is much more durable than cast iron). The Use the hammer blades for clearing saplings (5″ diameter or less) and for grasses.

Number of Blades: The VL-AGF N140 uses 12 hammer blades.

Precision Blade Overlap: On the VL-AGF series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.

Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.

Rotor Tube Diameter: 5″ – Heavy duty steel tubing for long life.

Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.

Hitch Type: Category 2 standard 3-point.

Drive Belts: The VL-AGF series uses 4 belts.

Gearbox Rating: Up to 85 hp. Heavy duty proven oil bath gearbox for long life.

Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO

Finish: Baked on powder coat, powder coat is superior to paint.

Warranty: 2 year parts warranty with an optional 2 year extension.

Support Before and After the Sale: At Betstco  our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.

Additional information

Cutting/ Working Width


Total Width


Min. HP Req

45-85 Hp


Cat II

PTO Speed

540 rpm

Horizontal Extension

7 feet 8.4 inches

Vertical Extension

5 feet 10 inches

Minimum weight tractor & loader

5000 lbs

Gearbox rating

85 hp

Heavy Duty Gearbox



Up 90 degrees, down 55 degrees

Hydraulic Offset

Vertical Pivot 145 degrees, angle up 90 degrees, angle down 55 degrees or float

Hydraulic Requirements

Hydraulic source must be constant flow for powering mower control valve. Control valve is optional. It is not included with mower. We recommend use of 4-way valve with a detent for float position. When the float spool is connected to the vertical pivoting cylinder, this will allow mower to float and naturally follow the ground contour.

Hammer Blades

12 Hammers

Cutting Capacity

4" Diameter

Cutting Height

1/4 – 6"

Housing Thickness


Sideplate Thickness


Reinforced Lift Point


Roller Diameter

5 7/8"

Rotor Shaft Diameter


Reverse Rotor Rotation


Blade swing

15" Diameter

Balanced Rotor & Shaft


Front Flappers


Side Skids


Closed Rear Panel (AGF)


Adjustable rear deck (AGFN)

On AGFN only

No. of Belts


External Belt Adjustment


3-Pt Cat II Connection Width

30.5" – 41.5"

Driveline Type

Series 5 Quick Connect, Shear Bolt Std. 6-Spline


Easy Access/Greaseable

Gearbox Lubrication/Capacity

1 Quart


2 year

Weight (AGFN, AGF is less)

1590 lbs

Crated Weight

1660 lbs

Explaining the flail mower