Description
- For Tractors 22+ HP
- Comes with Hammer Blades with precise blade overlap
- Multiple Drive Belts Assure Power to the Blades
- Under Deck Clump Busters
- Standard 3-Pt Category I Hitch Mount
- Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
- PTO Driveline Included Free of Charge
- Adjustable Finished Cutting Height (both Rear Roller & Skids)
- Balanced Rotor and Shaft
- Powder Coat Paint Finish
- Optional Hydraulic Offset
For Complete Specifications See Brochure Under Additional Resources Below (VL-EFGC in Video)
Gear Box
The EFGC Series has a rugged cast iron gearbox. The gearbox has a continuous rating of 65 HP.
Bearings
Bearings are greasable and replaceable. Sizing is standard and can be purchased at any local bearing shop.
Blade Arrangement
Flail mowers come in different sizes. The EFGC Series sizes vary from 47 – 83 inches. The number of flail blades and their arrangement varies. Blades are measured as blades per foot of rotor. A mower with a large number of blades gives a closer and cleaner cut than a mower with fewer blades.
Blade (Knife) Options
When the shaft or axle rotates at a high speed on the mower, the attached flail blades are pushed out by centrifugal force and sever grass, weeds and brush. The EFGC Series available blades are grass “Y” blades (10.9 oz./309g) or Hammer blades (27 oz./766g). These blades provide a finer and smoother finish. Designed for very light brush; nothing larger than 3” in diameter. These blades may be sharpened and used for lawn grooming
Cutting Height
Cutting height can be adjusted by the tractor’s 3-Pt hitch or by the mowers adjustable rear roller. The EFGC Series can be adjusted to cut grass 1/4 – 6 inches. Mower is also equipped with anti-scalping side rails and a tapered roller to ensure smooth turns.
Adjustable Offset
Right Side Offset is very helpful if you are working around fence lines, trees or other item s in the field. The offset is the addition to ½ the total mowing width. The distance is listed in the specifications table is the addition that is added to ½ the mowing width from center of the gearbox to the right cutting edge.
OPTIONAL Hydraulic Offset
The hydraulic cylinder permits the carrier frame to be moved under your command. This permits you to control the cutting position of the mower. Designed so that you can get around rows, trees, fence line, or whatever else is in your path. This is connected to a Remote Hydraulic designed to power the cylinder (also known as 2-way valve) or the rear remote on your tractor design to power the cylinder.
Support Before and After the Sale
At Betstco Farmer-Helper our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.
Two or Four Year Warranty
All Betstco Farmer-Helper equipment is built tough, and comes with an equally robust warranty for two years, and for a small additional fee you can double it to 4 full years.
Available Models:
Farmer Helper EFGC105
Farmer Helper EFGC125
Farmer Helper EFGC155
Farmer Helper EFGC175
Farmer Helper EFGC195