60″ Heavy Duty Flail Mower, FH-EFGC155

$2,970.00

In stock

SKU: FH-EFGC155 Category: Tag:

Lift Gate Needed *

What is a lift gate?:

A lift gate is for truck deliveries for those without a forklift or front end loader to remove the unit from the truck.

Extended Warranty

Extra set of belts (Recommended for first time flail mower users)

Extra set of hammerblades

Extra set of grass blades

Forged Hammers *

Swap Hammer Blades with Grass Knives on machine

Description

The EFGC Series (Heavy Duty) Flail Mower is an option if you are working on grass or brush. Ideal for an orchard, nursery, vineyard, in the greenhouse or for gardening. With its fast blade tip speed and interchangeable blades it is perfect for your grounds keeping tasks. If you need to maintain more dense areas, install the hammer blades and you will be able to cut and mulch wooded material up to 3 inches in diameter.  This model is great for acreage larger than 15 acres. Flail Mowers are useful for jobs where you are cutting grass on uneven ground, high grass, weeds, brush, and small saplings. A flail mower doesn’t throw grass, instead it cuts finely and leaves the cuttings on the ground where it was cut making it an excellent choice for those places where you could cause damage by throwing debris. Highway mowing and park maintenance often use flail mowers because they are less likely to throw objects during cutting.
Key Features:
  • Comes with hammer blades with precise blade overlap
  • Multiple drive belts assure power to the blades
  • Under Deck Clump Busters
  • Standard 3-Pt category I hitch mount
  • Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
  • PTO driveline included free of charge
  • Adjustable finished cutting height (both rear roller & skids)
  • Balanced rotor and shaft
  • Powder coat paint finish
  • Optional hydraulic offset kit

Specifications:

Spec FH-EFGC155
Working Width 60”
Overall Width 67”
Min. HP Req. 25 HP
Hitch Cat. I
Gear Box Rating 65 HP
Distance Right of Center Mount 35.25 inches or 39.50 inches
Std Hammer Blades 24 Hammer Blades
Housing Thickness 4mm
Side Plate Thickness 1/4”
Rotor Dia. 4”
Rotor Shaft Dia. 4 1/2”
Blade Swing 14.5”
No. of Belts 3 Belts
3pt Conn. Width Driveline Type Series 5 Quick Connect Shear Bolt, 6-Spline
Weight 720 lbs
Crated Weight 755 lbs

 

Details:

 

Overall Width: The EFGC 155 has a overall width of 67″.

Cutting Width: The EFGC 155 has a cutting width of 60″.

Weight: The EFGC 155 series has a weight 720 lbs.

HP Requirements at PTO: The EFGC 155 series requires 25 – 65 PTO horsepower.

Cutting Height: The EFGC series has a 0″ – 6″ Adjustable to meet various height requirements

Housing Material Thickness: The EFGC series has a housing thickness of 4mm.

Side Plate Thickness: The EFGC series has a side plate thickness of 1/4″.

Blade Type: The EFGC series uses standard hammer blade or reversible Y-blades. Each hammer blade weighs 1 lb. 11 oz made of cast steel (cast steel is much more durable than cast iron). Use the hammer blades for clearing saplings (3″ diameter or less), and for grasses.

Number of Blades: The EFGC 155 uses 24  hammer blades.

Precision Blade Overlap: On the EFGC series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.

Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.

Rotor Tube Diameter: 4″- Heavy duty steel tubing for long life.

Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.

Rotor Swing Diameter: 14 1/2″ Large swing so that the blades build required inertia.

Hitch Type: Category 1 standard 3-point.

Offset From Center Mount: This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO the mower extends 35 1/4″ or 39 1/2″.

Drive Belts: The EFGC 155 uses 3 belts.

Gearbox Rating: Up to 65 hp. Heavy duty proven oil bath gearbox for long life.

Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO

Finish: Baked on powder coat, powder coat is superior to paint.

Support Before and After the Sale: At Betstco  our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.

Additional information

Gearbox Rating

65 HP Allows Cat-I tractors up to 50 HP to use this Mower

Heavy Duty Gearbox

Standard Strong Cast Iron gearbox with steel gears will provide years of reliable service built in overrunning feature prevents mower from pushing tractor when power is disengaged

Knife Tip Speed

9,805 This provides for a clean cut

Distance Right of Center Mount

35.25 inches or 39.5 inches 3-Point Hitch may be attached in two positions allowing you to change mowers right offset when looking at the mower from operators seat

Hydraulic Offset

Optional The hydraulic cylinder permits the carrier frame to be moved under your command. This permits you to control the cutting position of the mower. Designed so that you can get around rows, trees, fence line, or whatever else is in your path. This is connected to a Remote Hydraulic designed to power the cylinder (also known as 2-way valve) or the rear remote on your tractor design to power the cylinder.

Optional Grass "Y" Blades (10.9 oz)

48 Blades Reversible "Y" Blades with precise blade overlap is important to achieve an even cut result

Hammer Blades (27 oz)

24 Hammers Allows you to cut & mulch wooded material up to 3"

Cutting Capacity

3" Diameter With Hammer blades

Cutting Height

0 – 6 Variable heights allow you to set correct height for your application

Housing Thickness

1/4" Resist; denting & wear

Side Plate Thickness

1/4"/7 mm Provides structural support

Reinforced Lift Point

Standard Allowing you to raise & move Mower without implement being attached to your tractor

Roller Diameter

4" Utilized to adjust cutting height, greaseable bearings and rounded at the edges to prevent gouging during turns with mud scraper for positive height control

Rotor Shaft Diameter

4 1/2 Large diameter protects against being bent by obstructions

Reverse Rotor Rotation

Standard Shaft rotation is forward. The knives cut forward and up, picking up the bent over grass, pulling in the tall grass & weeds, cutting & shredding the material & discharging it to the rear

Blade Swing

14" Large swing so that the blades build the required force needed for cutting

Balanced Rotor & Shaft

Standard Increases the bearing life, minimizes vibrations, audible noise, power losses and finally it results in increased quality of product

Front Flappers

Standard To prevent material from being thrown out from under the deck

Side Skids

Standard Replaceable; protects sides of the mowers

Closed Rear Panel

Standard Prevents rocks & other material from being thrown from mower under force & provides greater mulching of mowed material

No. of Belts

2 Multiple belts ensure a positive transfer of power to your flail mowers blades. Provides safety slip clutch point

External Belt Adjustment

Standard Easy access to loosen or tighten a few bolts to apply tension, loosen to change the belts

3-Pt Cat I Connection Width

26" Allows for easy connection to a wide range to Cat-I hitch tractors

Driveline Type

Series 4 Quick Connect, Shear Bolt Std. 6-Spline The shear bolt protects the mower from damage if the rotor becomes plugged. It is important to used the correct replacement bolt of proper size & strength to ensure that the shear device will function properly.

Bearings

Easy Access/Greaseable Great for ease of maintenance and availability should you need to replace the bearings

Gearbox Lubracation/Capacity

3 Quarts SAE 80W – 90 Gear Oil

Weight

730 lbs

Crated Weight

755 lbs

Manual

The Manual Standard

Usage Video

Explaining the flail mower