Description
- Comes with hammer Blades with precise blade overlap
- Standard 3-Pt Category I Hitch Mount
- Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
- PTO Driveline Included Free of Charge
- Adjustable finished cutting height (both Rear Roller & Skids)
- Balanced Rotor and Shaft
- Powder Coat Paint Finish
- 2 Offset Positions
Specifications:
| Spec | FH-EFG105 |
| Working Width | 41” |
| Overall Width | 47” |
| Min. HP Req. | 18 HP |
| Hitch | Cat I |
| Gear Box Rating | 45 HP |
| Distance Right of Center Mount | 19.75 inches or 23.75 inches |
| Std Hammer Blades | 16 Hammer Blades |
| Housing Thickness | 3mm |
| Side Plate Thickness | 1/4” / 7mm |
| Rotor Dia. | 4” |
| Rotor Shaft Dia. | 4 1/2” |
| Blade Swing | 13” |
| No. of Belts | 2 |
| Driveline Type | Series 4 Quick Connect, Shear Bolt Std. 6-Spline |
| Weight | 480 lbs |
| Crated Weight | 510 lbs |
Details:
Overall Width: The EFG 105 has a overall width of 47″.
Cutting Width: The EFG 105 has a cutting width of 41″.
Weight: The EFG 105 has a weight 480 lbs.
HP Requirements at PTO: The EFG 105 requires 18 – 45 PTO horsepower depending on the size of the unit.
Cutting Height: The EFG series has a 0″ – 6″ Adjustable to meet various height requirements
Housing Material Thickness: The EFG series has a housing of 3mm.
Side Plate Thickness: The EFG series has a side plate thickness of 1/4″.
Blade Type: The EFG series comes standard with forged steel hammer blades. Each blade weighs 14 oz and does not need to be sharpened, as hammer blades bludgeon material to pulverize it into fine clippings. Hammer blades are rated for cutting tall grass and saplings 2” in diameter or less. We also carry optional cast steel hammer blades. If you do not have rocks or debris in your pasture, you can order a spare set of cast steel blades, they are rated for the same material (tall grass and saplings up to 2” diameter) but are less expensive than a set of forged hammers. We also carry grass knives that are only good for tall grass, but it leaves a nicer looking cut. Grass knives are made of tool steel and will deflect rocks without breaking.
Number of Blades: The EFG 105 uses 16 hammer blades.
Precision Blade Overlap: On the EFG series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.
Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.
Rotor Tube Diameter: 4 1/2″- Heavy duty steel tubing for long life.
Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.
Rotor Swing Diameter: 13″ Large swing so that the blades build required inertia.
Hitch Type: Category 1 standard 3-point.
Offset From Center Mount: This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO the mower extends 19 3/4″or 23 3/4″.
Drive Belts: The EFG 105 uses 2 belts.
Gearbox Rating: Up to 45 hp. Heavy duty proven oil bath gearbox for long life.
Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
Finish: Baked on powder coat, powder coat is superior to paint.
Support Before and After the Sale: At Betstco our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.
