Description
- For Tractors 45 – 85 HP
- Comes with 43 oz. Hammer Blades
- 5” Diameter Rotor Shaft
- Multiple Drive Belts Assure Power to the Blades
- Under Deck Clump Busters
- Standard 3-Pt Category II Hitch Mount Only
- Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
- PTO Driveline Included Free of Charge
- Adjustable Finished Cutting Height (both Rear Roller & Skids)
- Balanced Rotor and Shaft to Reduce Vibration & Reduce Bearing Wear
- Powder Coat Paint Finish
Specifications:
These machines require a tractor that has 2 rear remote hydraulic ports (4 hoses), or a single hydraulic port (2 hoses) if you get the optional float or non-float valve controller.
| Spec | FH-AGF140 | FH-AGF160 | FH-AGF180 |
| Working Width | 55” | 63” | 71” |
| Total Width | 72.5” | 80.5” | 88.5” |
| Required HP | 45 – 85 HP | 50 – 85 HP | 55 – 85 HP |
| Min Weight of Tractor & Loader | 5000 lbs | 5500 lbs | 6000 lbs |
| Hitch | Cat II Only | Cat II Only | Cat II Only |
| Gear Box Rating | 85 HP | 85 HP | 85 HP |
| Pivot Offset | 68” Right | 76” Right | 84” Right |
| Vertical Offset | 145 Degrees | 145 Degrees | 145 Degrees |
| Angle UP | 90 Degrees | 90 Degrees | 90 Degrees |
| Angle Down | 55 Degrees | 55 Degrees | 55 Degrees |
| Std Hammer Blades | 12 Blades | 14 Blades | 14 Blades |
| Housing Thickness | 5mm | 5mm | 5mm |
| Side Plate Thickness | 5/16” | 5/16” | 5/16” |
| Rotor Dia. | 5 7/8” | 5 7/8” | 5 7/8” |
| Rotor Shaft Dia. | 5” | 5” | 5” |
| Blade Swing | 15” | 15” | 15” |
| No. of Belts | 4 | 4 | 4 |
| 3pt Cat-II Conn. Width | 30 1/2” – 41 1/2” | 30 1/2” – 41 1/2” | 30 1/2” – 41 1/2” |
| Driveline Type | Series 5 Quick Connect, Shear Bolt | Series 5 Quick Connect, Shear Bolt | Series 5 Quick Connect, Shear Bolt |
| Weight | 1318 lbs | 1430 lbs | 1500 lbs |
| Crated Weight | 1363 lbs | 1490 lbs | 1600 lbs |
Details:
Overall Width: The AGF 160 has a overall width of 72.5″.
Cutting Width: The AGF 160 has a tilling width of 55″.
Weight: The AGF 160 has a weight 1430 lbs.
HP Requirements at PTO: The AGF 160 requires 50 – 85 PTO horsepower.
Cutting Height: The AGF series has a 0″ – 6″ Adjustable to meet various height requirements
Housing Material Thickness: The AGF series has a housing of 5mm thick.
Side Plate Thickness: The AGF series has a side plate thickness of 5/16″.
Blade Type: The AGF series uses heavy duty hammer blade. Each hammer blade weighs 2lbs 12 oz made of cast steel (cast steel is much more durable than cast iron). Use the hammer blades for clearing saplings (4″ diameter or less) and for grasses.
Number of Blades: The AGF 160 uses 14 hammer blades.
Precision Blade Overlap: On the AGF series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.
Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.
Rotor Tube Diameter: 5″ – Heavy duty steel tubing for long life.
Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.
Hitch Type: Category 2 standard 3-point.
Pivot Offset From Center Mount: This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO the mower extends 76″.
Hydraulic Offset: The hydraulic cylinder permits the carrier frame to be moved under your command. This permits you to control the cutting position of the mower. Designed so that you can get around rows, trees, fence line, or whatever else is in your path. This is connected to a Remote Hydraulic designed to power the cylinder (also known as 2-way valve) or the rear remote on your tractor design to power the cylinder. Hydraulic Requirements: Hydraulic source must be constant flow for powering Control Valve. We recommend use of Front Loader Style Control Valve with Float Option. Float spool connected to the vertical pivoting cylinder will allow mower to float and naturally follow the ground contour.
Drive Belts: The AGF series uses 4 belts.
Gearbox Rating: Up to 85 hp. Heavy duty proven oil bath gearbox for long life.
Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
Finish: Baked on powder coat, powder coat is superior to paint.
Support Before and After the Sale: At Betstco our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.
