FH-FM Finish Mower

$1,455.00

SKU: FH-FM120,  FH-FM150,  FH-FM180

find your tractors pto hp here

2 year warranty with optional 4 years

working width

Working Width

48" - 72"

powered by pto power

Powered By:

Tractor PTO
15- 45 HP

rotary-blade

Comes with Rotary Blade

brush

Suitable for:

Tall/Medium Grass

Select Finish Mower Below to Purchase

[tailor_products style="default" layout="grid" items_per_row="2" dots="1" meta="price" image_link="post" image_size="thumbnail" posts_per_page="12" product_tag="144" order_by="title" order="ASC" class="tailor-5f8f2725524h4"][/tailor_products]

Description of finish mowers:

The Farmer-Helper finish mowers allow mowing close to shrubs and building for faster yard maintenance. Either side may be used for close trimming. This is a feature that is not available on side discharge systems. The rear discharge gives you an advantage for eliminating grass buildup in uncut areas; it also reduces blade wear and fuel costs.

The medium-lift blades lift the grass and cut it cleanly. It then discharges the cut grass evenly to the rear of the mower path. The full-width discharge throat provides an almost clear flow of cut material. The chain guard allows the grass to be safely and smoothly discharged while providing protection from objects being thrown.

Key Features of finish MOWERS:

  • Standard category-I 3-Pt. Hitch Mount
  • Floating 3-pt systems allow the mower to closely follow ground contours resulting in a quality cut
  • This full-length rear discharge finish (grooming) mower is designed for homeowners, camps, parks or anyone that needs to maintain lawn & turf surfaces.
  • The open rear discharge cutting deck provides quality cut and clipping distribution when grass is cut on a frequent basis and ground conditions are not wet.
  • Blade spindles and hubs are heavy duty cast iron and greaseable
  • Rear damper system to prevent piling and clumps
  • Heavy duty all steel reinforced deck (frame-over-deck design)
  • Turf-friendly 3” x 8” Solid rubber wheels with a greaseable hubs
  • Top access to grease points

Specifications of finish MOWERS:

Spec FH-FM120 FH-FM150 FH-FM180
Working Width 47” 59” 71”
Total Width 51” 62” 74”
Min. HP Req. 15 HP 15 HP 15 HP
Hitch Cat I Cat I Cat I
Gear Box Rating 45 HP 45 HP 45 HP
Discharge Full Length Rear Full Length Rear Full Length Rear
Blade - Qty - Size & Lift Type 3 Qty - 16” Hardened Steel Medium Lift 3 Qty - 20” Hardened Steel Medium Lift 3 Qty - 24” Hardened Steel Medium Lift
Blade Tip Speed 13,488 FPM 17,985 FPM 21,582 FPM
Cutting Height 1” - 3” 1” - 3” 1” - 3”
Deck Housing/Side 3/16” 3/16” 3/16”
Blade Overlap 3/4” 3/4” 3/4”
Roller Bearing Blade Spindle 2 3/4” Housing w/ 1-1/4” Spindle 2 3/4” Housing w/ 1-1/4” Spindle 2 3/4” Housing w/ 1-1/4” Spindle
Caster Gauge Wheels 3” X 8” 3” X 8” 3” X 8”
Caster Wheel Spindle Size/Type Sealed Bearing with 1” Spindle Sealed Bearing with 1” Spindle Sealed Bearing with 1” Spindle
Top Link Type Floating Floating Floating
Lower Link Type Fixed Fixed Fixed
Belt System Tensioned Belt Drive System Tensioned Belt Drive System Tensioned Belt Drive System
No. of Belts 2 2 2
Driveline Type Series 4, 1 3/8” 6-Splinew/ Shear Bolt Series 4, 1 3/8” 6-Splinew/ Shear Bolt Series 4, 1 3/8” 6-Splinew/ Shear Bolt
Weight 445 lbs 478 lbs 524 lbs
Crated Weight 485 lbs 518 lbs 562 lbs

3 reviews for FH-FM Finish Mower

  1. George

    While the assembly instructions are not good, the mower assembly isn’t difficult to figure out by anyone familiar with a socket-set. A check-inspection as if you are the factory final-quality-inspector is a good idea…found a couple of loose items, but nothing difficult. Overall, this is a good value for the price and does a fine job of cutting my 20 acres of turf aircraft runways. One rwy was overgrown and probably should have used a rotary cutter first, but this FH-FM180 did fine first-pass, second-pass made it golf-course quality. WARNING: Blade bolts are LEFT HAND. Use 80/90 gear oil, 1 qt in gearbox. Grease 3 spindles, and two zerks in PTO shaft U-joints. No-scalp wheels are not greaseable, and their longevity will be interesting. Warranty support is GREAT! I had a center spindle seize after ten hours and their new parts-guy ROCKY is FAST and knowledgeable. Thank you!

  2. Steven Judson

    This PTO driven finish mower seems to be very well constructed and heavy duty. Betstco had the best price with free shipping. It arrived promptly, well packaged within a steel angle iron frame, which one end piece unbolted to allow mower to be carefully lifted out. There wasn’t any assembly instructions included, but a good picture on the front of the operation and parts manual was sufficient. I spent a couple hours assembling and tightening all bolts. The gear box takes 1 quart of 80w-90 gear oil which needs to be purchased and installed before use. I had to shorten the supplied drive shaft 5” for a proper installation length.
    My initial trial cut set with all spacers at bottom of axle spindle, which is the highest setting, was a touch too high. So with each 1” spacer moved above, to spindle clip side, made a beautiful cut down around 2 1/2” range. This I being used to cut a 5 acre horse pasture, which has been 99% cleared of rocks and has a slight rolling terrain.
    I had been using a 54” craftsman garden tractor for the past 15 years. I should have purchased this 15 years ago, because this unit took me about 2 1/2 hours, instead of 5 hours and I was not a green furry looking monster when done. And didn’t have to spend another hour cleaning up my lawn mower and myself.
    I’m using this FM180 behind a MT2201D Mitsubishi, which just cruises right along, no bogging down, just cutting grass and taking names. The rear discharge keeps the blades free from clogging and bogging down. After using the first 2 1/2 hours I just hosed the top and bottom down, blew it off, dried it and greased parts. I also pulled belt covers just to check for adjustment, which were snug before first use. I found they now needed a slight snugging as they must have “set in”. I adjusted the belt drive back about a 1/4” after making a mark on housing in original position. I also pulled the blades to refresh the cutting edge. (Note: the blade bolts are left hand threads and take a 13/16” socket)
    I highly recommend this unit from Betstco, as after a ton of research, found this to be the best deal you can find on a heavy duty, well built finish mower. Many of the reviews on the King Kutter were not good and were considerably more money.
    Thanks so much to Betstco!
    Stevereno

  3. Bob Dunstan

    Instructions are inadequate. The mower comes in a steel frame metal banded to a wooden pallet. Mower and accessories are securely wired to the frame. Unpacking was uneventful until I tried to remove the mower from the frame. I had to hacksaw the frame apart. The assembly instructions are laughable as the say to refer to the exploded view.
    Unfortunately it is low quality and inconsistent with the picture. This made assembly of the 3pt top link attachment a challenge. There is a note that says oil has to be added to the gear box – while it calls out 90 weight, it does not say how much is needed. There are clearly labeled access points for the blades. But there are threaded holes, but no xerk fittings. :-(. Finally, the PTO drive shaft would not slide on the splined shaft because there was a very big burr in the spline directly in front of the spring loaded lock. I had to file down. Finally, the plastic safety cover on the gear box is so small I can’t get my hand in to press the lock button on the drive shaft.

    The overall quality of the mower appears to be good. To be a really good product better however, unpacking and assembly instructions are needed. Either install the missing xerks or supply them. And supply better information about the gear box oil requirements.

Add a review

Your email address will not be published. Required fields are marked *