60″ Heavy Duty Flail Mower, FH-EFGC155
31 in stock
- Comes with hammer blades with precise blade overlap
- Multiple drive belts assure power to the blades
- Under Deck Clump Busters
- Standard 3-Pt category I hitch mount
- Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
- PTO driveline included free of charge
- Adjustable finished cutting height (both rear roller & skids)
- Balanced rotor and shaft
- Powder coat paint finish
- Optional hydraulic offset kit
|Min. HP Req.||25 HP|
|Gear Box Rating||65 HP|
|Distance Right of Center Mount||35.25 inches or 39.50 inches|
|Std Hammer Blades||24 Hammer Blades|
|Side Plate Thickness||1/4”|
|Rotor Shaft Dia.||4 1/2”|
|No. of Belts||3 Belts|
|3pt Conn. Width Driveline Type||Series 5 Quick Connect Shear Bolt, 6-Spline|
|Crated Weight||755 lbs|
Overall Width: The EFGC 155 has a overall width of 67″.
Cutting Width: The EFGC 155 has a cutting width of 60″.
Weight: The EFGC 155 series has a weight 720 lbs.
HP Requirements at PTO: The EFGC 155 series requires 25 - 65 PTO horsepower.
Cutting Height: The EFGC series has a 0" - 6" Adjustable to meet various height requirements
Housing Material Thickness: The EFGC series has a housing thickness of 4mm.
Side Plate Thickness: The EFGC series has a side plate thickness of 1/4".
Blade Type: The EFGC series uses standard hammer blade or reversible Y-blades. Each hammer blade weighs 1 lb. 11 oz made of cast steel (cast steel is much more durable than cast iron). Use the hammer blades for clearing saplings (3" diameter or less), and for grasses.
Number of Blades: The EFGC 155 uses 24 hammer blades.
Precision Blade Overlap: On the EFGC series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.
Rotor Rotation - Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.
Rotor Tube Diameter: 4"- Heavy duty steel tubing for long life.
Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.
Rotor Swing Diameter: 14 1/2" Large swing so that the blades build required inertia.
Hitch Type: Category 1 standard 3-point.
Offset From Center Mount: This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO the mower extends 35 1/4" or 39 1/2".
Drive Belts: The EFGC 155 uses 3 belts.
Gearbox Rating: Up to 65 hp. Heavy duty proven oil bath gearbox for long life.
Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
Finish: Baked on powder coat, powder coat is superior to paint.
Warranty: 2 year parts warranty with an optional 2 year extension.
Support Before and After the Sale: At Betstco our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.
60" Good for many applications
67" Good for many applications
|Min. HP Req||
25 HP Compatible with most subcompact tractors
Cat I Allowing you to utilize your Cat I toplink & lift Arm 5/8" connection
540 RPM is standard Cat I PTO Speed
65 HP Allows Cat-I tractors up to 50 HP to use this Mower
|Heavy Duty Gearbox||
Standard Strong Cast Iron gearbox with steel gears will provide years of reliable service built in overrunning feature prevents mower from pushing tractor when power is disengaged
|Knife Tip Speed||
9,805 This provides for a clean cut
|Distance Right of Center Mount||
35.25 inches or 39.5 inches 3-Point Hitch may be attached in two positions allowing you to change mowers right offset when looking at the mower from operators seat
Optional The hydraulic cylinder permits the carrier frame to be moved under your command. This permits you to control the cutting position of the mower. Designed so that you can get around rows, trees, fence line, or whatever else is in your path. This is connected to a Remote Hydraulic designed to power the cylinder (also known as 2-way valve) or the rear remote on your tractor design to power the cylinder.
|Optional Grass "Y" Blades (10.9 oz)||
48 Blades Reversible "Y" Blades with precise blade overlap is important to achieve an even cut result
|Hammer Blades (27 oz)||
24 Hammers Allows you to cut & mulch wooded material up to 3"
3" Diameter With Hammer blades
0 – 6 Variable heights allow you to set correct height for your application
1/4" Resist; denting & wear
|Side Plate Thickness||
1/4"/7 mm Provides structural support
|Reinforced Lift Point||
Standard Allowing you to raise & move Mower without implement being attached to your tractor
4" Utilized to adjust cutting height, greaseable bearings and rounded at the edges to prevent gouging during turns with mud scraper for positive height control
|Rotor Shaft Diameter||
4 1/2 Large diameter protects against being bent by obstructions
|Reverse Rotor Rotation||
Standard Shaft rotation is forward. The knives cut forward and up, picking up the bent over grass, pulling in the tall grass & weeds, cutting & shredding the material & discharging it to the rear
14" Large swing so that the blades build the required force needed for cutting
|Balanced Rotor & Shaft||
Standard Increases the bearing life, minimizes vibrations, audible noise, power losses and finally it results in increased quality of product
Standard To prevent material from being thrown out from under the deck
Standard Replaceable; protects sides of the mowers
|Closed Rear Panel||
Standard Prevents rocks & other material from being thrown from mower under force & provides greater mulching of mowed material
|No. of Belts||
2 Multiple belts ensure a positive transfer of power to your flail mowers blades. Provides safety slip clutch point
|External Belt Adjustment||
Standard Easy access to loosen or tighten a few bolts to apply tension, loosen to change the belts
|3-Pt Cat I Connection Width||
26" Allows for easy connection to a wide range to Cat-I hitch tractors
Series 4 Quick Connect, Shear Bolt Std. 6-Spline The shear bolt protects the mower from damage if the rotor becomes plugged. It is important to used the correct replacement bolt of proper size & strength to ensure that the shear device will function properly.
Easy Access/Greaseable Great for ease of maintenance and availability should you need to replace the bearings
3 Quarts SAE 80W – 90 Gear Oil
2 Year Parts available through Betst Products Parts Department