60″ Rough Duty Flail Mower With Hydraulic Offset, VL-MF155CMH
Out of stock
- Comes with 27 oz. Hammer Blades
- Multiple Drive Belts Assure Power to the Blades
- Under Deck Clump Busters
- Standard 3-Pt Category I & II Hitch Mount
- Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
- Adjustable Finished Cutting Height (both Rear Roller & Skids)
- Balanced Rotor and Shaft
- Powder Coat Paint Finish
|Min. HP Req.||25 HP|
|Hitch||Cat I or II|
|Gear Box Rating||65 HP|
|Cutting Offset||1” Offset|
|Deck Distance Right of Center Mount||31 Inches|
|Std Hammer Blades||24 Hammer Blades|
|Optl “Y”/Rock Blades||48 “Y”/Rock Blades|
|Housing Thickness||Reinforced 6 Gauge|
|Side Plate Thickness||5/16”|
|Rotor Shaft Dia.||4 1/2” x 8mm|
|No. of Belts||3|
|3pt Conn. Width||27 1/2” - 40”|
|Driveline Type||Series 5 Quick Connect Shear Bolt, 6-Spline|
|Crated Weight||725 lbs|
Overall Width: The VL-MF155CM has a overall width of 66″.
Cutting Width: The VL-MF155CM has a tilling width of 60″.
Weight: The VL-MF155CM has a weight 695 lbs.
HP Requirements at PTO: The VL-MF155CM requires 25 - 65 PTO horsepower.
Cutting Height: The VL-MFCM series has a 0" - 6" Adjustable to meet various height requirements
Housing Material Thickness: The VL-MFCM series has a housing thickness of reinforced 6 gauge.
Side Plate Thickness: The VL-MFCM series has a side plate thickness of 5/16".
Blade Type: The VL-MFCM series uses standard hammer blade or reversible Y-blades. Each hammer blade weighs 1 lb. 11 oz made of cast steel (cast steel is much more durable than cast iron). The Y-blades weigh 10.9 oz. Use the hammer blades for clearing saplings (3" diameter or less), and the Y-blades for grasses.
Number of Blades: The VL-MF155CM uses 24 hammer blades or 48 Y-blades.
Precision Blade Overlap: On the VL-MFCM series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.
Rotor Rotation - Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.
Rotor Tube Diameter: 4"- Heavy duty steel tubing for long life.
Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.
Rotor Swing Diameter: 15" Large swing so that the blades build required inertia.
Hitch Type: Category 1 or 2 standard 3-point.
Offset From Center Mount: This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO the mower extends 1".
Drive Belts: The VL-MF155CM series uses 3 belts.
Gearbox Rating: Up to 65 hp. Heavy duty proven oil bath gearbox for long life.
Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
Finish: Baked on powder coat, powder coat is superior to paint.
Warranty: 2 year parts warranty with an optional 2 year extension.
Support Before and After the Sale: At Betstco our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.