53″ Commercial Centered Flail Mower, FH-FMC135


8 in stock

This commercial flail is ideal for mowing the growth between the rows and/or mulching your pruning in place. The mowing width on the FMC is centered behind your tractor for easy control of where you mow. The FMC has a strong box channel 3-point frame and a deck with additional reinforcement. Under the deck. You have clump buster bars that assist the mulching action of this flail. Comes with our 27 ounce EFGC all crop hammer style blades installed. These blades chop grass, weeds and brush in one pass.

Key Features:

  • Centered Commercial flail has 65 HP cast-iron gearbox
  • Multiple drive belts assure power to the blades.
  • Adjustable rear roller with mud scraper bar, heights of 0 to 6 inches
  • β€œY” grass/rock blades are optional.
  • Under deck clump busters
  • Zero cutting width offset keeps your flail where you want it.
  • Rear height adjusting roller with tapered ends to eliminate gouging when turning
  • Optional hydraulic offset kit available.



Spec FH-FMC135
Working Width 53”
Overall Width 59”
Min. HP Req. 26 HP
Hitch Cat I
Gear Box Rating 65 HP
Cutting Offset Zero - Centered Cut
Std Hammer Blades 20 Hammer Blades
Optl β€œY”/Rock Blades 40 β€œY”/Rock Blades
Housing Thickness 4mm
Side Plate Thickness 5/16”
Rotor Dia. 4”
Rotor Shaft Dia. 4 1/2”
Blade Swing 15”
No. of Belts 3 Belts
3pt Conn. Width 27 1/2
Driveline Type Series 4 quick connect Shear bolt, 6-spline
Weight 616 lbs
Crated Weight 656 lbs


Overall Width: The FMC 135 has a overall width of 59β€³.

Cutting Width: The FMC 135 has a tilling width of 53β€³.

Weight: The FMC 135 has a weight 616 lbs.

HP Requirements at PTO: The FMC 135 requires 26 - 65 PTO horsepower.

Cutting Height: The FMC series has a 0" - 6" Adjustable to meet various height requirements

Housing Material Thickness: The FMC series has a housing of 4mm.

Side Plate Thickness: The FMC series has a side plate thickness of 5/16".

Blade Type: The FMC series uses standard hammer blade or reversible Y-blades. Each hammer blade weighs 1 lb. 11 oz made of cast steel (cast steel is much more durable than cast iron). The Y-blades weigh 10.9 oz. Use the hammer blades for clearing saplings (3" diameter or less), and the Y-blades for grasses.

Number of Blades: The FMC 135 uses 20Β  hammer blades or 40 Y-blades.

Precision Blade Overlap: On the FMC series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.

Rotor Rotation - Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.

Rotor Tube Diameter: 4 1/2"- Heavy duty steel tubing for long life.

Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.

Rotor Swing Diameter: 15" Large swing so that the blades build required inertia.

Hitch Type: Category 1, standard 3-point.

No Offset, Perfectly Centered: The FMC series is perfectly centered so you can pick the size to match your tractor's wheel width.

Drive Belts: The FMC 135 uses 3 belts.

Gearbox Rating: The FMC series is rated 65 hp. Heavy duty proven oil bath gearbox for long life.

Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO

Finish: Baked on powder coat, powder coat is superior to paint.

Warranty: 2 year parts warranty with an optional 2 year extension.

Support Before and After the Sale:Β At BetstcoΒ  our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.

Additional information

Weight 1000 lbs
Working Width


Overall Width


Min. Hp Req

26 HP


Cat I

Gear Box Rating

65 HP

Cutting Offset

Zero – Centered Cit

27 Oz. Hammer Blades

20 Blades

Optional "Y" Rock Blades

40 Blades

Housing Thickness

Reinforced 6 gauge

Side Plate Thickness


Roller Dia.


Rotor Shaft Dia

4 1/2"

Blade Swing


No of Belts

3 Belts

3-Pt. Conn. Width

27 1/2

Driveline Type

Series 4 Quick Connect, Shear Bolt, 6-Spline


2 Year


616 lbs

Crated Weight

656 lbs