48″ Standard Ditch Bank Flail Mower, FH-AGL125


6 in stock

Verger flail mulchers are Super Heavy Duty Mowers designed with heavy cutting blades that can chop heavy brush including grasses, debris, sticks, vines, branches, and other wooded materials up to 2” in diameter. The mower head is attached to a hydraulic arm allowing you to swing the mulcher beyond your tractors wheels. The head may be pivoted hydraulically up to 90 degrees for hedge or hillside work or down 60 degrees for ditch or bank work. Connect it to our optional 4-way hydraulic control valve with a hydraulic float and the mulcher will follow the contours of the terrain.A flail mower doesn’t throw grass, instead it cuts finely and leaves the cuttings on the ground where it was cut making it an excellent choice for those places where you could cause damage by throwing debris. Highway mowing and park maintenance often use flail mowers because they are less likely to throw objects during cutting.
Key Features:

  • 4.5” Diameter Rotor Shaft
  • Multiple Drive Belts Assure Power to the Blades
  • Under Deck Clump Busters
  • Standard 3-Pt Category I Hitch Mount
  • Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
  • PTO Driveline Included Free of Charge
  • Balanced Rotor and Shaft to Reduce Vibration & Reduce Bearing Wear
  • Powder Coat Paint Finish


Spec FL-AGL125
Working Width 48”
Overall Width 54”
Min. HP Req. 20 HP+
Min Weight Tractor/ Loader 3400 lbs
Hitch Cat I
Gear Box Rating 65 HP
Pivot Offset 44” Right
Std Hammer Blades 20 Hammer Blades
Housing Thickness 3mm
Side Plate Thickness 1/4”
Rotor Dia. 4”
Rotor Shaft Dia. 4 1/2”
Blade Swing 14”
No. of Belts 3 Belts
3pt Conn. Width 28” - 29”
Driveline Type 6-Spline W/Shear Bolt
Weight 675 lbs
Crated Weight 699 lbs


Overall Width: The AGL 125 has a overall width of 54β€³.

Cutting Width: The AGL 125 has a tilling width of 48β€³.

Weight: The AGL 125 has a weight 675 lbs.

HP Requirements at PTO: The AGL 125 requires 20 - 65 PTO horsepower depending on the size of the unit.

Cutting Height: The AGL series has a 0" - 6" Adjustable to meet various height requirements

Housing Material Thickness: The AGL series has a housing of 3mm thick.

Side Plate Thickness: The AGL series has a side plate thickness of 1/4".

Blade Type: The AGL series uses standard hammer blade. Each hammer blade weighs 14 oz made of cast steel (cast steel is much more durable than cast iron). Use the hammer blades for clearing saplings (2β€³ diameter or less).

Number of Blades: The AGL 125 uses 20 hammer blades.

Precision Blade Overlap: On the AGL series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.

Rotor Rotation - Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.

Rotor Tube Diameter: 4 1/2"- Heavy duty steel tubing for long life.

Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.

Hitch Type: Category 1 standard 3-point.

Pivot Offset From Center Mount: This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO the mower extends 44".

Hydraulic Offset:Β The hydraulic cylinder permits the carrier frame to be moved under your command. This permits you to control the cutting position of the mower. Designed so that you can get around rows, trees, fence line, or whatever else is in your path. This is connected to a Remote Hydraulic designed to power the cylinder (also known as 2-way valve) or the rear remote on your tractor design to power the cylinder. Hydraulic Requirements: Hydraulic source must be constant flow for powering Control Valve. We recommend use of Front Loader Style Control Valve with Float Option. Float spool connected to the vertical pivoting cylinder will allow mower to float and naturally follow the ground contour.

Drive Belts: The AGL series uses 3 belts.

Gearbox Rating: Up to 65 hp. Heavy duty proven oil bath gearbox for long life.

Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO

Finish: Baked on powder coat, powder coat is superior to paint.

Warranty: 2 year parts warranty with an optional 2 year extension.

Support Before and After the Sale:Β At BetstcoΒ  our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.

Additional information

Weight 675 lbs