48″ Heavy Duty Flail Mower, FH-EFGC125


In stock

Lift Gate Needed

What is a lift gate?:

A lift gate is for truck deliveries for those without a forklift or front end loader to remove the unit from the truck.

Extended Warranty

Extra set of belts (Recommended for first time flail mower users)

Extra hammerblades

Extra grass blades


The EFGC Series (Heavy Duty) Flail Mower is an option if you are working on grass or brush. Ideal for an orchard, nursery, vineyard, in the greenhouse or for gardening. With its fast blade tip speed and interchangeable blades it is perfect for your grounds keeping tasks. If you need to maintain more dense areas, install the hammer blades and you will be able to cut and mulch wooded material up to 3 inches in diameter.  This model is great for acreage larger than 15 acres. Flail Mowers are useful for jobs where you are cutting grass on uneven ground, high grass, weeds, brush, and small saplings. A flail mower doesn’t throw grass, instead it cuts finely and leaves the cuttings on the ground where it was cut making it an excellent choice for those places where you could cause damage by throwing debris. Highway mowing and park maintenance often use flail mowers because they are less likely to throw objects during cutting.
Key Features:

  • Comes with hammer blades with precise blade overlap
  • Multiple drive belts assure power to the blades
  • Under Deck Clump Busters
  • Standard 3-Pt category I hitch mount
  • Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
  • PTO driveline included free of charge
  • Adjustable finished cutting height (both rear roller & skids)
  • Balanced rotor and shaft
  • Powder coat paint finish
  • Optional hydraulic offset kit



Working Width48”
Overall Width54”
Min. HP Req.22 HP
HitchCat. I
Gear Box Rating65 HP
Distance Right of Center Mount23.50 inches or 27.75 inches
Std Hammer Blades20 Hammer Blades
Housing Thickness4mm
Side Plate Thickness1/4”
Rotor Dia.4”
Rotor Shaft Dia.4 1/2”
Blade Swing14.5”
No. of Belts2 Belts
3pt Conn. Width Driveline TypeSeries 4 Quick Connect Shear Bolt, 6-Spline
Weight600 lbs
Crated Weight635 lbs




Overall Width: The EFGC 125 has a overall width of 54″.

Cutting Width: The EFGC 125 has a cutting width of 48″.

Weight: The EFGC 125 series has a weight 600 lbs.

HP Requirements at PTO: The EFGC 125 series requires 22 – 65 PTO horsepower.

Cutting Height: The EFGC series has a 0″ – 6″ Adjustable to meet various height requirements

Housing Material Thickness: The EFGC series has a housing thickness of 4mm.

Side Plate Thickness: The EFGC series has a side plate thickness of 1/4″.

Blade Type: The EFGC series uses standard hammer blade. Each hammer blade weighs 1 lb. 11 oz made of cast steel (cast steel is much more durable than cast iron). Use the hammer blades for clearing saplings (3″ diameter or less), and for grasses.

Number of Blades: The EFGC 125 uses 20  hammer blades.

Precision Blade Overlap: On the EFGC series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.

Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.

Rotor Tube Diameter: 4″- Heavy duty steel tubing for long life.

Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.

Rotor Swing Diameter: 14 1/2″ Large swing so that the blades build required inertia.

Hitch Type: Category 1 standard 3-point.

Offset From Center Mount: This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO the mower extends 23 1/2″ or 27 3/4″.

Drive Belts: The EFGC 125 uses 2 belts.

Gearbox Rating: Up to 65 hp. Heavy duty proven oil bath gearbox for long life.

Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO

Finish: Baked on powder coat, powder coat is superior to paint.

Warranty: 2 year parts warranty with an optional 2 year extension.

Support Before and After the Sale: At Betstco  our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.

Additional information

Working Width


Overall Width


Min. HP Req.

22 HP


Cat. 1

Gear Box Rating

65 HP

Distance Right of Center Mount

23.5 inches or 27.75 inches

Hammer Blades

20 Hammer Optional

Optional "Y" Grass Blades

40 Blades Installed

Housing Thickness


Side Plate


Roller Dia


Rotor Shaft Dia

4 1/2"

No. of Belts

2 Belts

3pt. Conn. Width

19 3/4" – 27 1/2"

DriveLine Type

Series 4 Quick Connect, Shear Bolt, 6-Spline




610 lbs

Crated Weight

635 Lbs



Usage Video

Explaining the flail mower