Value-Leader VL-SLN Rotary Brush Mower
SKU: VL-SLN110, VL-SLN140
Comes with Rotary Blade
Brush up to 2 1/2″ thick
42″ – 54″
15- 50 HP
Who is Value-Leader?
Value-Leader Implements was started in 1995 to provide a high quality high value option to compete with USA tractor dealership branded products. The focus has always been on providing the US consumer with long lasting dependable equipment. This is more value for our customers money.
This is done by always using high quality components and testing the components use in our implements. We also test the finished products for dependability, to make sure that they not only work but, that they last. We strive for our implement to be trouble free, when maintained, for not less than a 5 year period.
Value-Leader was the first USA implement company to offer a two year warranty on tractor implements.
Key Features of Finish Mowers:
- Legal for non-agricultural use as Safety chain guards are included and installed, FREE!
- Use in the worst of cutting conditions.
- Ideal for clearing grass, weeds, and brush up to 3” diameter.
- Use on the farm, residential, landscaping, vineyard, orchards, ground maintenance, and light commercial.
- Includes standard 6 spline series – 4 PTO shaft w/shear bolt for maximum protection
- High blade tip speed assures a clean cut in a variety of cutting conditions.
- 1/2” x 3” heat treated alloy steel Free swinging blades
- Stump jumper hub
- Standard durable solid hard rubber wheel
- Powder coat paint finish
- One piece deck and sides
|Min. HP Req.||15 HP||20 HP||28hp|
|Hitch||Cat I||Cat I||Cat.1|
|Blade Size||1/2” x 3” x 15” Heat Treated Alloy Steel Free Swinging Blades||1/2” x 3” x 21” Heat Treated Alloy Steel Free Swinging Blades||1/2″ x 3″ x 26″ Heat Treated Alloy Steel Free Swinging Blades|
|Deck Thickness||8 Gauge – 5/32”||8 Gauge – 5/32”||8 Gauge – 5/32″|
|Gear Box Rating||50 HP||50 HP||50hp|
|Adj. Cutting Height||1 1/2” – 8”||1 1/2” – 8”||1 1/2″ – 8″|
|Cutting Capacity||Grass/Brush up to 2” Thick||Grass/Brush up to 2” Thick||Grass & Brush up to 2 1/2″ Thick|
|Stump Jumper||Round Pan 10 Gauge||Round Pan 10 Gauge||Round Pan 10 Ga.|
|Deck Height||8” Deck to Skid||8” Deck to Skid||8″ Deck to Skid|
|Skids||5/16” X 2” Weld On||5/16” X 2” Weld On||5/16″ x 2″ Weld On|
|Tail Wheel||3” X 15” Solid Rubber Tire||3” X 15” Solid Rubber Tire||3″ x 15″ Solid Rubber Tire|
|Gear Lube||80-90 Gear Oil||80-90 Gear Oil||80-90 Gear Oil|
|Driveline Type||Series 4 6-Spline 40” w/ Shear Bolt||Series 5 6-Spline 48” w/ Shear Bolt||Series 5 6-Spline 48″ w/ Shear Bolt|
|Safety Guards||Front (side) & Rear (Full) Chain||Front (side) & Rear (Full) Chain||Front(Side) & Rear(Full) Chain|
|Weight||530 lbs||635 lbs||715lbs.|
|Crated Weight||550 lbs||655 lbs||745lbs.|
Submit your review
not so sure need better review on strenth of the blades and extra heavy duty gier box thier be rough runnin where we go.