Skeleton Rock and Brush Grapples are the most versatile grapples. Built to withstand the abuse of the most powerful skid loaders on the market while at the same time being an invaluable tool for smaller machines. Excellent for moving hay bales.

Available in 60” and 72” widths these grapples feature 3” 3/8” spacing between each 3/8” tine with a 2” bar welded through the center of all the teeth, and are tied together by a ½” thick serrated cutting edge out front making them ideal for back dragging, raking, wedging small trees and even land leveling.

The bucket section of the grapple is robot welded solid for precision and strength, not stitched together like others on the market. These grapples feature thicker side plates which make them highly usable with a variety of applications from scrap metal, firewood, logs, brush piling, to rocks, the possibilities are endless. They have fully grease-able pivot points. Dual cylinder grapples open and close together but close to different levels making them ideal for grabbing and holding uneven loads in the bucket.

• 3 3/8 Inch Tine Spacing (18 on 5’ 22 of 6’)
• 1/2” Bucket Sides, 3/8” x 34” Rake Tines (Inside 29”)
• 17” Wide Dual Grabs with 2 1/2” Cylinders.
• Grab Hydraulic Pressure Regulator
• Re-enforcing Serrated Front Bucket Cutting Bar
• Mid Tine Bar.
• Raised Center Tine Edge to Catch Rocks and Branches
• Universal Skid Steer Quick-tach Mount.
• Come with hoses, cylinders and the most Common Skid
• Steer flat face couplers
• Weight: 60” 537 lbs 72” 642 lbs. Ship weight 635/710